4.9
( Sobre 5 )
  • -50%
  • SIN STOCK
Imprimación honey 120 ml

Imprimación honey 120 ml

8,99 €
4,50 € 50% de descuento
Impuestos incluidos

ALC-303

SIN STOCK

Métodos de pago
Pagos 100% seguros
¿Quieres que te avisemos cuando vuelva a haber stock?
 
Le enviaremos un correo electrónico una vez que el producto esté disponible. Su dirección de correo electrónico no se compartirá con nadie más.
Puntuaciones y opiniones de nuestros clientes
( 0.0 / 5) - 0 Opinión (es)

Honey Primer Its main use is a primer for the hi-shine finishes,if you mask and paint some panels gloss black,remove the tape and spray clear base over the entire model-then use 1 hi-shine shade the result will be a difference in 'tonal value' due to the light and dark base (as most kits are grey or silver plastic the panels which have only clear on them as a base modify the strength of the reflected light). The clear can be used as a base for the normal Alclad colours but it should be left for 24 hours before being painted over.



Alclad II Lacquers will reproduce a wide range of realistic and durable metal finishes on aircraft,car and truck models,armour and figures.

APPLICATION GUIDE-PLASTIC MODELS:
For use on injection plastic kits a primer is necessary. 'Regular ALCLAD' is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze.
Apply one of these primers before using Regular ALCLAD:
Tamiya Plastic Primers-white or grey
Auto Primer-white or grey
Future/Klear -floor sealer/polish
Plastic primers and auto primers should be lightly polished with 1000/1200 wet & dry paper to give a less absorbent glossy surface .
High Shine Finishes-Polished Aluminium, Chrome for plastic and Stainless Steel require a dark glossy base,use
Alclad Gloss Black Base
SPRAYING
" Alclad should be sprayed at 15-20psi.
" Spray from1 1/2 -2 1/2 inches away from the model.
" Apply light coats.
" Use the airbrush like a paint brush not an aerosol.
" Buffing is not necessary-though tonal variation can be made by polishing selected panels with Micromesh.
" A sealer is not required.
" Regular Alclad can be masked and over-painted. Decal solutions can be used with Regular Alclad,but are not recommended for Polished Aluminium,Chrome or Stainless Steel.
Transparent colours-these finishes can be applied directly over Regular Alclad to produce heat stains and anodised effects-Alclad High Shine Finishes will require sealing with water based clear before the application of Alclad Transparent colours.

ALC303

Ficha técnica

Volumen
120 ml
Peso de la Caja
140 gr

Referencias específicas

ean13